The Novawinch PRO9500 PRO PLUS is a 12V electric winch for properly equipped 4x4s, recovery vehicles and flatbed trailers. It provides 9,500lb (4,309kg) of rated single-line pull and comes with 26m of steel wire rope and a wired handheld remote.
Key features
- 9,500lb (4,309kg) rated line pull for vehicle recovery and loading.
- 12V series-wound motor for suitable vehicle electrical systems.
- 26m steel wire rope for demanding recovery conditions.
- 171:1 gearing with two-stage spur and two-stage planetary gears.
- Automatic brake in the gearbox to hold the load when winching stops.
- IP68-rated protection and a waterproof wired remote with a 3.9m cable.
Steel wire rope and controlled pulling
Steel wire rope is a practical choice for operators working around rough ground and abrasive surfaces. The PRO9500 combines its gearing with an automatic gearbox brake to provide controlled pulling during recovery and vehicle loading. Inspect the wire rope before use and replace it if strands are broken or the rope is otherwise damaged.
Built for outdoor use
The PRO PLUS series uses an aluminium housing, stainless steel fasteners and a protective powder-coated finish. Its IP68-rated sealing helps protect the winch against dust and water ingress. Regular cleaning, inspection and maintenance remain important after use in mud, water or grit.
Check your installation
The winch requires a suitable 12V battery system, correctly sized cabling and secure mounting. Its mounting bolt pattern is 254 × 114mm. The rated line pull describes pulling force, not lifting capacity or maximum vehicle weight. Follow the supplied instructions for installation and operating periods.
Browse more electric and hydraulic winches or explore Rydam’s recovery truck winch range. Contact the Rydam team if you need help checking fitment for your vehicle. Free UK delivery is available on Rydam orders.